Introducing VITA-LIFE AcquaPhi
VITA-LIFE AcquaPhi is an egg-shaped water activator which transforms your tap water into premium quality water. It’s the first professional “full-frequency-spectrum” water dynamizer that energetically charges and reorganizes ordinary tap water back to its original harmonic hexagonal crystalline structure.
Easy to Install
AcquaPhi Micro25 cm
AcquaPhi Micro is about 25 cm in height an designed for mobile applications or tapping drinking water at one single tap.
AcquaPhi Mini50 cm
The device is about 50 cm in height and is easy to install anywhere you like: at the hose of the bathtub, under the kitchen sink or by the kitchen faucet on the countertop.
AcquaPhi Home59.1 cm
IndoorMain Water Line
OutdoorMain Water Line
VITA-LIFE AcquaPhi Home was created to manage an entire house, and it is installed on the main water-line after the meter or the water pump.
VITA-LIFE AcquaPhi is also really functional
- Works without electricity
- Contains no filters
- Doesn't require maintenance
Observe and copy nature
- Viktor Schauberger
How it Works
The concept of VITA-LIFE AcquaPhi is based on the insights of the natural scientist Viktor Schauberger. The inner life of the water activator is a highly complex mechanism, using a sophisticated hydraulic system the water is vortexed while being subjected to pressure changes within a system of magnetic fields. In the process, the structural association existing in the molecules is reset.
VITA-LIFE AcquaPhi operates upon the electromagnetic properties of water and its molecular structure.
It restructures and revitalizes water by creating a powerful vortex shaped flux.
AcquaPhi dramatically reduces the side effects of contaminants and increases the detoxifying power of ordinary tap water.
Higher oxygen content
It alters water's molecular structure, infusing it with a higher oxygen content as well as a higher conductivity coefficient.
- DNAPHIGOLDEN RATIO
- MAGNETIC FIELDS
Harmonic geometries, DNA and scalar field
The "Golden Ratio" is the basis for the engineering, design, and function of VITA-LIFE AcquaPhi. Design parameters have been entirely based upon Phi and Pigreco. The properties of egg shaped containers were well known as far back as ancient times. The hydraulic system engineered into AcquaPhi follows the geometry of DNA and the proportionality of Phi.
Natural Frequencies and Metamaterials
VITA-LIFE AcquaPhi utilizes a specialized matrix of materials which, without direct contact, have the ability to influence the molecular structure of water by way of emanating frequencies. These frequencies are naturally occurring and the exotic matrix of materials in VITA-LIFE AcquaPhi used to emulate them have an almost eternal life!
Memory of Water and Magnetic Fields
VITA-LIFE AcquaPhi uses magnetic fields in order to reset the energy traces of contaminants with which the water has come into contact. In this way the water molecules lose their old memories and are ready to receive a new imprinting.
Hexagonal structured water
The transformation results in revitalized water yielding a more powerful 'life-force.' The water structure is reorganised in smaller hexagonal units (clusters). The hexagonal structure meets the structure of natural water and is health enhancing.
Uses & benefits
Showering and bathing with activated water can soften the skin. The skin stays warm for a longer time, because activated water conducts heat better.
Activated water boils faster and the food prepared in activated water tastes better.
You have less limescale buildup in faucets and boilers. As it conducts and retains heat more effectively, you can also reduce your heating costs.
Pets prefer activated water to regular tap water. Cows that are nourished with activated water produce milk of higher quality.
Plants which are watered with activated water grow faster and bear more higher quality fruits.
Activated water produces aragonite – a mild type of limescale which hardly settles and can easily be removed compared to ordinary limescale. This way the washing machine stays limescale-free.
You need less chlorine in the swimming pool water, which then has positive effects on your skin.
What is hexagonal water?
What is the natural structure of water? This question was the starting point of research conducted by the world's foremost leading authority on water science, Prof. Dr. Mu Shik Jhon.
He found out that the hexagonal structure (“hexa” is Greek for “six” and “gonia“ stands for “angle”) seems to be the natural structure of water.
The hexagon is made of six water molecules which are situated around a center and build a star pattern resembling an ice crystal. The more of these clusters are in the water, the more structured it is and the higher the quality, according to Jhon.
Hexagonal water influences the smallest unit in the organism: the cell.
It can have positive effects on the entire organism, because the body is made of trillions of cells: neural cells, skin cells, blood cells and many more.
What is the difference between hexagonal and ordinary tap water?
Hexagonal water has a different structure than regular water. Science has shown that water saves information of the materials with which it comes into contact.
So it also “remembers” toxins, contaminants and other substances that have a negative impact. These substances are gathered in clusters, which are more or less un-structured.
Hexagonal water is made of smaller and more structured clusters which do not contain any old memories. The water can enter the cells more easily. It protects and reinvigorates them as well as enhances the health of the organism.
Activated water is also good for children.
Babies have almost 100% hexagonal water in their bodies. Over the years, this changes. When children drink activated water, they absorb what nature has given them from the beginning.
Get slowly accustomed to activated water.
Activated water moves more rapidly within the cells. Since water supports every metabolic process including the removal of metabolic waste, drinking too much activated water right away may cause noticeable detoxification.
A quick detoxification is often accompanied by symptoms of fatigue, headache, changes in bowel movements, excessive mucus discharges, etc. Therefore, it is wise to begin by drinking small amounts of activated water.
For this reason it is also more reasonable to connect AcquaPhi to only one faucet. If you are healthy, begin by drinking one litre per day. For those with health challenges, begin by drinking 4 ounces/day - gradually increasing over a period of several weeks to the point where you drink 8-10 glasses of activated water every day.
It is important to continue drinking at least 8 glasses of regular water each day while you are increasing the amount of activated water. You can drink it chilled or at room temperature – any way you prefer.
“Healthy” water is structured like natural water. It does not contain any waste products and has a hexagonal structure. The more structured the water, the more health enhancing.
Hexagonal water cleanses the organism more efficiently.
Toxins, heavy metals and other substances that have been accumulated over the years are washed out with hexagonal water.
The cells absorb it better.
Minerals and nutrients can access the cells more easily.
It contributes to cell protection.
Providing the cells with premium-quality water.
It boosts metabolism.
And has positive effects on digestion. It can support weight loss.
It keeps you young.
In the process of aging, the cells lose water. Structured water makes sure that the cells are nourished with water.
It keeps you fit.
It increases the amount of red blood cells which results in a higher oxygen supply. You feel more energetic and powerful.
- 26 cmAcquaPhi Micro
Scope of application For mobile applications or usage at a single tap (drinking water) Flow rate at 5 bar 400 (liter per hour) Coupling size connection 3/8" Internal pipe diameter 8 mm Material of pipe system Flexible pipework made of corrosion-resistant stainless steel Material of body housing Polystyrol Allowable water and operating temperature From 0,5°C to 60°C Max. operating press. 15 bar Dimensions
(Height, Depth, Width)
25 x 18 x 18 cm
(including integrated base)
Set-up area for the base 18 x 18 cm Structural weight 0,7 kg Sales price incl. VAT EUR 930,-
- 50 cmAcquaPhi Mini
Scope of application For drinking water, showers or bathtubs. (Installation to the main water-line in small homes possible, if possible reduction of water flow rate will be accepted) Flow rate at 5 bar 1000 (liter per hour) Coupling size connection 1/2" Internal pipe diameter 12 mm Material of pipe system Flexible pipework made of corrosion-resistant stainless steel Material of body housing Polystyrol Allowable water and operating temperature From 0,5°C to 60°C Max. operating press. 15 bar Dimensions
(Height, Depth, Width)
50 x 25 x 25 cm
(including detachable base)
Set-up area for the base 25 x 25 cm Structural weight 3 kg (including detachable base) Sales price incl. VAT EUR 1.596,-
- 60 cmAcquaPhi Home
Scope of application Installation into the main water-line Flow rate at 5 bar 2700 (liter per hour) Coupling size connection 1" Internal pipe diameter 20 mm Material of pipe system Flexible pipework made of corrosion-resistant stainless steel Material of body housing Polystyrol Allowable water and operating temperature From 0,5°C to 60°C Max. operating press. 15 bar Dimensions
(Height, Depth, Width)
60 x 30 x 30 cm
(including mounting bracket at the backside)
Set-up area for the base -- Structural weight 5,3 kg (including mounting bracket at the backside) Sales price incl. VAT EUR 2.880,-
For legal reasons we point out that the effects of AcquaPhi are not 100 % scientifically proven. This is the case with the majority of methods in alternative or natural medicine (e.g. homeopathy) and so it is for VITA-LIFE AcquaPhi. Only in the last few years the official sciences opened up for topics like water structure and water memory. Results of research are yet to be expected. Our clients are aware of the fact that AcquaPhi is a product outside the framework of conventional science. We also point out that AcquaPhi is not offered to diagnose, heal or prevent diseases. This device has not been produced for the medical treatment of diseases, but aims at supplementing the daily nutrition with dynamized water.
- What is AcquaPhi
AcquaPhi is an innovative stationary unit for the production of indefinite quantities of activated water with a structure similar to the structure of cell water. The transformation of normal tap water into structured water is carried out with a sophisticated system, in which special and naturally occurring geometries, vortexes, magnetic fields and materials are used. The water treated in such way can supply the cells with water more easily, has a light and pleasant taste and is thirst-quenching. To sum up, this is water that resembles the water coming from a mountain spring.
- Is it possible to detect the effects of AcquaPhi scientifically?
In May 2013 at the University of Bari, under the supervision of Prof. Domenico Spinazzola, Department of Preventive Medicine (Medicine and Surgery) a diploma thesis was written on the effects of AcquaPhi on users.
To date, we have a series of clues to the effects of AcquaPhi on the water, which is a confirmation of our approach. These effects are also enumerated in the thesis mentioned above. The observed effects are i.e. better plant growth, better and fresher taste, no calcification, smoother and softer skin, etc.
As with most other methods of alternative medicine, the effects of AcquaPhi have not yet been scientifically proven in the strictest scientific sense. Only recently the official science started to consider topics such as water structure and memory, and this is why appropriate definite results can be expected in the future.
Our customers are aware that AcquaPhi is a product that is still outside the framework of conventional science.
Even if we can only make general statements about the effects and the technology of water activation at the moment, we are still convinced that the approach of the Austrian water pioneer Viktor Schauberger- comprehend and copy nature – leads to achieving the goal of having the best water for our health and this we fully and profoundly took into account when developing the AcquaPhi. Many customers from all over the world are highly satisfied with AcquaPhi and do not want to do without it anymore.
- How much activated / structured water should a person drink?
To enjoy the full benefits of structured water, it is recommended to drink 2 litres per day.
People who have built up large amounts of metabolic waste can experience typical detoxification symptoms such as fatigue or diarrhoea. These symptoms will disappear and it is important to continue drinking activated water in order not to interrupt the detoxification process. The water amount can possibly be reduced for several days so that the symptoms are less severe. Additional bathing in activated water supports the body in the detoxification process.
- How long does AcquaPhi water remain active? Should it be kept in the refrigerator?
The water remains active for months and does not lose its effect. It can be stored in the refrigerator or at room temperatures. It is preferable to use glass bottles for storage. Plastic containers very often contain harmful softening agents which can easily pass into the water.
- Effects on animals and plants
Activated or structured water is instinctively preferred by biological organisms, including animals. Increased plant growth has been observed.
- Why is water with a hexagonal structure so important?
Some studies have shown that due to its special structure activated water conducts biologically important signals better and faster, enhances nutrient absorption capacities and more efficient discharge of heavy metals and other toxins. According to Dr. Mu Shik Jhon, structured hexagonal water is mainly found in healthy cells, it protects the DNA structure and supports a variety of metabolic functions. His research reveals how both disease and aging are linked to the loss of hexagonal water in the body.
- Can AcquaPhi be used in food preparation?
One of the benefits of AcquaPhi is that you can make promptly activated water anywhere you want. Naturally, this water can be used in food preparation. Just like the taste of the water is improved, the quality of the food is enhanced as well. It has often been reported that coffee, for instance, tastes milder and at the same time retains its intensive flavour. Batter can be made with this water, while food products such as fruits and vegetables can be left in the water for several minutes for biophysical upgrade.
- Can small children drink AcquaPhi water?
Absolutely. According to “The Water Puzzle and the Hexagonal Key” by Dr. Mu Shik Jhon, “babies have almost 100% hexagonal water in their bodies when they are born. Drinking water that is similar to the cell water from early childhood is clearly a benefit for a person’s health”.
- Why bath in activated water?
The human body is 70-80% water. If considering the number of molecules, even 99% of all molecules of our body are water molecules. It has been observed that activated water transfers its biophysical properties to a certain extent to the surrounding normal water. The paper “DNA, Waves and Water“ of the Nobel prize winner Luc Montagnier and the quantum physicist Emilio Del Giudice explains such effects scientifically with the properties of a “quantum field”. When bathing in activated water, the water molecules are indirectly activated through the existing bathwater.
- Effects on lime
AcquaPhi has a very useful effect on the lime structure. Normal lime is transformed into “aragonite”. “Aragonite” is a type of lime which does not accumulate on the walls or surfaces.
The calcium lime which is already deposited in the pipelines will also be transformed into “aragonite” over time. It may occur that whole lime blocks come off. That is why sometimes you will find pieces of lime in the faucet filter.
AcquaPhi does not remove lime, but instead changes its structure. This is the reason why water hardness measurements will remain the same.
- Does the water treated with AcquaPhi lose its structure again when heated?
Water molecules are organised in groups. Close above the freezing point (0° C) such a “water molecule ball” is made of approx. 700 water molecules, at 20° C of 450, at 37° C of 400 and during the transition from liquid to gaseous state, in other words when the water is boiling, of at least 50 water molecules.
Such water molecule concentrations are generally known as „water clusters“. For this reason the information from the past history of the water cannot be “deleted” with boiling, and conversely the AcquaPhi water in the form of water vapour, still has the corresponding natural information. During the treatment in AcquaPhi the water gets information, which results in the formation of a hexagonal structure. Structured or activated water has typical properties which remain preserved in heated condition. For example, there are reports of a more intensive yet milder aroma of coffee and tea which are made with heated water.
- Does the water treated with AcquaPhi retain its structure when it flows through the pipes?
Yes, the structure remains preserved. The natural scientist Viktor Schauberger, whose theories were used for developing the AcquaPhi, said that water “dies” when flowing through pipes with circular cross-section. Therefore the question is justified. But AcquaPhi water is dynamised to such an extent that it can easily “survive” (i.e. the structure remains unchanged) even when flowing though very long pipes. For the same reason, the water treated in AcquaPhi remains stable and can be easily stored for months.
- What makes the difference between AcquaPhi and other devices for the production of activated/dynamised water?
Most systems used for water activation are limited in scope to “overwrite” the existing water information with biologically appropriate frequencies or information without previously “erasing the old memory”. Just think of video tapes, where one could overplay the tape with a new film. However, the image quality was not as good as when the film was recorded on a new tape. Just like the magnetic tape of a cassette, so does water also store information. In order to ensure the quality of information and to avoid that old information remains, it is necessary to “erase” any old water memory if highest water quality is sought. AcquaPhi (with a 1⁄2“ connector) „erases“ the old water memory within a running distance of almost 4 meters. AcquaPhi “home” version (with a 3⁄4“connector) exhibits this performance after a distance of almost 7 meters. This is achieved by the rotation of water in a specially designed magnetic field. At present, we are not aware of any other device with such water “formatting” capacities.
Upon erasure, new information is „imprinted“. This information is provided by the special mixture of materials “Mixos” as the information carrier, on which research has been conducted for approx. 20 years. With complex tests on different natural materials and frequencies it was established that “Mixos” delivers by far the best results. To this date, AcquaPhi is the only “water device” using “Mixos”. In addition to the already mentioned features, AcquaPhi extremely amplifies natural vibrations. This is achieved mainly due to the special egg-shape designed in accordance with the “golden section”. This form was discovered by the manufacturer of AcquaPhi in 2002 and also published in Schauberger’s “Implosion” magazine. It is at present the only device which uses this special geometry and is protected by a corresponding utility model. In addition to the special egg-shape, the device has also a “layer charge according to W. Reich”, which is achieved with alternating organic and metallic layers. To this end, the metallic pipes and the organic water have been cleverly integrated. Besides, they also correspond to the “Torkado model” (universal torus vortex structure according to the physicist Gabi Müller).
- Why is the device built in the proportions of the “golden section” and does the “golden section” refer only to the casing or to the other components of the device as well?
Viktor Schauberger recommended to “copy nature” in order to stimulate build-up processes. Nature “uses” non-euclidean geometries such as curves, spirals and eggs. It is significant that life is created in eggs. Even the womb has an egg-shape. The “golden section” („Phi geometry “) is a constant that is found everywhere in the universe and in nature. It thus seemed appropriate to calculate and use an egg form according to the “golden section”. Aside from the casing, the pipes inside of the device have also been designed according to the Phi geometry.
- How long can the information providing material “Mixos” produce effects, i.e. is its effective period limited?
According to the specifications of the “Mixos” manufacturer, the effective period of “Mixos” in AcquaPhi is unlimited.
- Are mechanical parts installed in the device or is the turbulence achieved by means of a pipe system?
There are no parts installed inside of the AcquaPhi. The pipe system is uninterrupted from the start till the end. The pipe system is twisted or “spiralled” at regular intervals, causing swirls in the water.
- Can AcquaPhi or structured water affect the pH- value?
So far, it has been established that the pH-value, depending on the output water, is slightly increased and levels off at 7,4 (slightly alkaline), which luckily is equivalent to the “ideal value” for body cells. According to Schauberger’s theories, this could also be expected because alkaline water (pH > 7) corresponds to the structuring “implosion principle”, whereas acidic water (pH < 7) corresponds to the destructive “explosion principle”. However, the influence of AcquaPhi or structured water on the pH-value should be examined more closely. First examinations were conducted at the University of Naples (Prof. Elia). According to thermodynamics of Prigogine, the mixing temperature is increasing when superordinated structured are formed in the water. In addition to this, at the same time the pH-value increases, which explains the slightly increased pH- value above the structuring when AcquaPhi is used. Due to the fact that this matter has not been finally examined, we are unable to make a statement as to whether AcquaPhi or structured water affects the pH-value.
- Is a water filter necessary when AcquaPhi is used?
AcquaPhi is designed for drinking water and itself has no filter effect, because it is assumed that the water is already free from harmful substances, i.e. that the levels are below the legally stipulated limits. AcquaPhi operates with the water structure. But the fact is that drinking water is partially contaminated, even if the levels remain below the stipulated limits. In this case AcquaPhi can be combined with a filter system. There are different filter systems that can be applied in different situations. If, for instance, residues of medicinal products are found in the water, these should be filtered out. However, filtering does not eliminate the effects. The residues leave traces in the “water memory” and have, in terms of homeopathy, a negative effect on the organism. And this is precisely where AcquaPhi steps in, by “erasing” the entire water memory. That is why in some cases it is advisable to use the combination of filter and AcquaPhi. When additionally using a filter or other components, AcquaPhi should always be arranged at the final position, so that the final way of the water always goes through the AcquaPhi.
- What is the proof of “better” water? Taste alone is no quality criterion and water, which has been kept for a long time, usually tastes different from “freshly tapped” water from the tap.
Water running out of AcquaPhi immediately has a different taste (“sweet”, fresh – just like mountain spring water) without having to rest for some time. This has been observed and confirmed by almost all users. Even if this is not exactly a scientific criterion, it is still pretty impressive and repeatable.
The official science has only recently started dealing more seriously with the topic of water structure. There are several reasons for this, as explained by Prof. Pollack in the introduction to his book “The fourth Phase of water”. At present, the proof in the form of crystal photos and the effects on biological systems can be demonstrated indirectly. The late Japanese water researcher Masaru Emoto, who developed crystal photography, proposed a simple, yet undeniable test criterion: improved plant growth. And this is exactly what happens when AcquaPhi is used.
A few words about the improved water structure when water is left to rest for a while. It seems to be true that after coming out of AcquaPhi the quality of the water is further improved (“maturing”). It evidently has a sweeter taste, and this has been confirmed by many users. The explanation lies in the discoveries of the already mentioned Prof. Pollack. He observed that on hydrophilic (water-absorbing) surfaces water molecules organise in a hexagonal honeycomb structure. The more energy the water has, the thicker will be the layer of the structured water. This can be radiation energy (light, heat) but also turbulence (dynamisation). In this sense, AcquaPhi sustainably increases the energy level of the water.
Water structuring takes some time, and that explains the „maturing“. AcquaPhi causes an energy increase, which then results in the structuring. Consequently, another question comes up: “Is it advisable to leave the AcquaPhi water rest for a while before drinking?” The answer is yes, only if you want a better taste. Otherwise, waiting is not necessary, because our body cells contain numerous hydrophilic surfaces on which “energised” water can deposit in a structured way.
AcquaPhi is still considered to be an innovation. For innovations, particularly in the initial stage, many proofs are still missing. With time, when these proofs are provided, innovations become state-of-the-art. AcquaPhi is “virgin land” that we approach and explore progressively with courage and dedication. The world needs other technologies that are in harmony with nature. Schauberger recommended observing and copying nature. We believe in and apply this approach, and the result is AcquaPhi.
- Where can I read more about “structured water” and its properties, i.e. about the statements made herein?
- Bachmann, K.: Wasser: Das magische Element, in: GEO Magazin (2006), 07.
- Bergsmann, O.: Struktur und Funktion des Wassers im Organismus. Versuch einer Standortbestimmung, Vol. 14, Vienna 1994.
- Elia, V. et al.: The ‘Memory of Water’: an almost deciphered enigma. Dissipative structures in extremely dilute aqueous solutions, in: Homeopathy. 96 (2007), 3, p. 163–169.
- Eyring, H. et al.: Significant Liquid Structures. VI. The Vacancy Theory of Liquids, in: Proceedings of the National Academy of Sciences. 47 (1961), 4, p. 526–537.
- Fellin, A.: *Das richtige Wasser für Ihre Gesundheit. Welches Wasser ist wirklich rein? So beugen Sie Krankheiten vor und steigern Ihr Wohlbefinden, Stuttgart 2006.
- Jhon, M. S. et al.: Hexagonales Wasser. Der Schlüssel zur Gesundheit, Dt. Erstausg, Potsdam 2008.
- Ludwig, R.: Wasser: Von Clustern in die Flüssigkeit, in: Angewandte Chemie. 113 (2001), p. 1856–1876.
- Merkel, W.: Immer mehr bizarre Eigenarten beim Wasser entdeckt. Wasser ist der bestuntersuchte Stoff und gibt doch noch viele Rätsel auf. Seine bizarren Eigenschaften machen es zum Medium des Lebens,
- Pollack, G. H.: Water and Health, URL: faculty.washington.edu/ghp/research-themes/water-and-health/ (07.08.2014).
- Pollack, G. H.: The fourth phase of water. Beyond solid, liquid, and vapor, Seattle, WA 2013.
- Roy, R. et al.: The Structure Of Liquid Water. Novel Insights From Materials Research; Potential Relevance To Homeopathy, in: Materials Research Innovations. 9 (2005), 4, p. 577–608.
- Schauberger, V. et al.: Das Wesen des Wassers. Originaltexte, herausgegeben und kommentiert von Jörg Schauberger, 4th Edition, 2012, Baden, München 2006.
- Vaiger, M. et al.: Water. Die geheime Macht des Wassers, München 2010.